VX1 PRO — Setup & Guide
Quick start
- Insert batteries: open the external battery door on the ear cup, insert 2× AAA, close.
- Power on / volume: turn the recessed volume knob — it powers the unit and sets ambient amplification level.
- Fit: cushions fully around the ears; adjust the headband so the gel seals all around — including over glasses temples.
Bluetooth pairing
- Enable Bluetooth on your phone.
- Follow the pairing step shown in your printed manual.
- Select "VorSound VX1" in your device list.
- Music, podcasts, and calls play through the HD speakers; ambient awareness and protection stay active independently.
Wired connection
Plug the included 3.5mm aux cable into the jack for a wired audio connection.
Using it right
- The unit amplifies quiet sounds (voices, game, commands) up to 6x and compresses harmful noise within 0.02s.
- For full protection the cushions must seal — remove hats/hoods between cup and head; push long hair aside.
- Storage: keep in the included bag; remove batteries for long storage.
Troubleshooting
| No power / no amplification | Fresh AAAs, check orientation, close the door fully |
| One side quiet | Check the volume knob on that side (independent left/right) |
| Bluetooth won't connect | Forget "VorSound VX1" on your phone, re-pair; keep the phone within 1m |
| Crackling in wind | Normal mic wind noise — lower the amplification |
| Muffled ambient sound | Clean mic ports gently; check cushions are seated correctly |
Safety
- This is hearing protection for noise environments; it is not a hearing aid or medical device.
- Even with protection, limit exposure to sustained loud noise.
- Read all warnings in the printed manual before use. Failure to follow warnings may result in serious personal injury, including hearing loss.
- Keep away from small children (small parts: batteries).
Support
contact@vorsound.com · VORSOUND LLC, 1603 Capitol Ave Suite 413G-1850, Cheyenne, WY 82001 USA